Aeropoxy
As good as Aeropoxy but cures in 1/2 the time.
Aeropoxy vs Vpoxy - the differences
-
Aeropoxy is white, Vpoxy is clear
- Aeropoxy is totally thixotropic - i.e. it will not run or sag. Vpoxy is slightly less thixotropic - thus it may penetrate some materials better.
- Aeropoxy initial setup time is about 3 hours at 75°F. Vpoxy initial setup time is about 1 hour at 75°F.
- Technical data on the strength properties of both glues render them about the same.
- Aeropoxy and/or Vpoxy are Aerospace grade adhesives and the strongest epoxy based glues available to the modeler.
BVM has been using this Aerospace grade glue for about a year to glue sub assemblies on our Ultra Bandit and F-100's.
We are offering it for the general market by popular demand from our Ultra and F-100 customers that like what they received.
It requires a 2:1 plunger if you already have an Aeropoxy dispenser gun.
For information on Aeropoxy click here
Contact Us
All graphics and photos
Copyright 2014 BVM, Inc.
Use of graphics or photos without written permission from
BVM is
strictly prohibited. |