Festo Fittings

We know that when it's time to make another turbine installation you can come up one connector Festo fitting short, so BVM is making these handy items available for quick delivery.
We install an on/off rotary valve (JetCat part #JCA1013) in all of our models, locating it after the fuel pump and before the engine.
Keeping this valve closed at all times, except when the engine is running is a good idea - especially while fueling the model.
SAFETY TIP - Should you forget to close it during fueling, first place the model on its nose (perfectly vertical) and allow the fuel to drain out. Begin the start up with the rotary valve closed. If the light off (on propane) is smooth and lean, slowly open the rotary valve to allow the start to continue. This procedure will minimize or eliminate a rich, flaming start.


On/Off valve #JCA1014 $10.95

Quantity Festo Fittings
#5317 6mm straight connector $5.95
#5319 4mm check valve $10.95
#5320 4mm straight connector $5.95
On/Off valve, Fuel T and Fuel line plug
on/off ball cock valve $11.95
Fuel line "T" for 6mm line $0.50
Fuel line plug for 6mm line $1.25