|
For Turbine or EVF power. |
Specifications
LENGTH: 64"
WEIGHT (D.F.): 16-17
lbs
WEIGHT (Turbine): 18-20 lbs
WING SPAN: 72"
PERFORMANCE: 35-150 mph with VIOFAN and 35-180 mph with turbine
power
Kit Pricing | Color Schemes | Customers with their F-80's
BVM's proven design
of this early USAF jet
fighter
is a great canidate for turbine power.
![]()
With 11-14 pounds of thrust and a dry weight of 19lbs (including
wing tanks) the F-80's performance is just right for those who are looking for
a medium performance scale jet.![]()
A single 2 Liter fuel cell and a U.A.T. provide about 8 minutes of
very reliable flight time.![]()
It flies
very similar to the Viojett/BVM .91 powered model but with the sound of a
turbine and a bit higher end speed.![]()
We have the wing tip tanks (early Lockheed style) setup to drop in
flight. When they are on, the model has increased presence and visibility.
After you pickle them in flight, you will be flying a very aerodynamically
clean and fuel efficient model. It will easily attain 180mph.![]()
A full flap, full speed brake approach to
landing will require about 1/2 throttle until descent on final giving the pilot
total control of the touch down point.![]()
So, here is a turbine powered scale jet that doesn't require a
trailer to haul it or two men and a boy to pick it up, and, it will operate
very comfortably from your local club field.![]()
Check out the many paint schemes and tip tank combinations
that are available to replicate the USAF's first production jet
fighter.![]()
The orange and white NAVY
version was called a TV-1. There were only about 50 of these A/C in operation
in a few Naval Air Reserve squadrons, but it does make an easy to see, great
looking model jet.![]()
Should you
get started in turbine flying with a BobCat, the F-80 will make a great second
and scale jet to progress to that utilizes the same size engine.

An F-80 strong point - the landing.
Shown below are several good looking paint schemes.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Needed
to Complete for Turbine power
(flaps and full gear doors included in kit), a Turbine
engine (AMT AT-180, JetCat P-80, RAM 500, SWB Mamba, WREN 54), BVM F-80
Retracts with Air System (8505), Duro-Struts [3] (5420), F-80 Jet Wheels &
Brakes (5640).
F-80 3-view
included
in kit
