Up

JetCat P130-RX

Call 407-327-6333 for the latest kit/engine combo pricing and save $$$

$2,599.00
BVM # P-130-RX

The new P130-RX is particularly suitable for models of medium size or for twin models where weight must be paid attention to but high thrust performance is required.

Note: Battery not included.

The P130-RX turbine also reduces cabling and tubing costs. The valves are complete integrated in the turbine housing. It is only a single hose connection from the pump to the turbine necessary.

 

The turbine is electrically connected to the ECU via a single PowerBus connection cable. In addition to the supply battery and the connection to the receiver (1-2 channels), the ECU only has to have the fuel pump connected.

The power supply is preferably a 3S / 2100mAh LiFePo4 battery. This not only provides the ECU and the fuel pump, but also all connections to the bus system optional components such as a additional pump for Smoke and / or LCU (lighting control). When using another bus pump this can be configured as a smoker pump. The setting of the smoker pump power then takes place directly of the ECU / GSU. Alternatively, the ECU V12.0 can be supplied with a 2S LiPo. The ECU V12.0 has an integrated precise air pressure and temperature sensor, through which the turbine control intelligently to the current environmental conditions. The ECU V12.0 also has an internal telemetry adapter.

The temperature sensor is installed internally on the turbine side, but can be used if required nevertheless be easily exchanged. The engine starts directly with kerosene.

 

Features

JetCat autostart

Internal kerosene start and temperature sensor

ECU V12.0, digitalized bus system for minimal cabling and integrated telemetry function

Connection from the turbine to the ECU with only one plug-in connection!

ECU with auto-power-down function. ECU shuts off automatically after cooling down (RC system can be switched off, ECU remains ON until cooling down is finished).

ID chip on the turbine side, for convenient JetCat compatibility.

Proven JetCat jet start.

CFD-optimized and 5-axis milled compressor.

Internal bearing lubrication with 5% oil content.

Supplied with all accessories for installation and operation (without battery).

Made in Germany

36 months warranty

Fuel max ml/min 500

Fuel at idle ml/min 100

Weight g 1326

Dia mm 99 Length 284

Idles at 40,000

Max rpm 127,000

Thrust at idle .89lbs

Thrust at max 29.23lbs

 

 

Call for availability

 

 

Contact Us
All graphics and photos Copyright 2021 BVM, Inc.
Use of graphics or photos without written permission from BVM is strictly prohibited.

JetCat P130RX