To speed up the cycle time of your BVM "Saddle Cells™" or other batteries, BVM offers these "Cool Trays™". Since it is ill advised to recharge electric motor batteries until they cool down to ambient temperatures, these aluminum trays with the integrated blowers will cut your cool down time in half.

The anodized aluminum "C" channel tray functions as a heat sink and allows the 12 volt blower to pass cooling air above and below the packs. The trays are of sufficient mass to prevent them from sliding around on your charging table even when they are not battery loaded. The blower snaps in place in one end of the tray and can be easily removed for more compact storage and transport.

The wire harness material and plugs (supplied) allow the "Cool Tray" blowers to be easily powered by the Iota power supply or any 12 volt source.

The Cool Trays™ are especially useful during summertime operation.