BVM Transmitter Tray Modified to Accept
Billy Gerard
(France) winter vacations in Orlando, Florida.
You must make a 3/8" slot as out lined by the tape to allow the handle on the top of the transmitter to set into. Use a Perma-Grit # RD-2 or # RD-3 cutting wheel at medium speed to cut through the plastic material. Make notches as outlined at the ends of the slot to fully accept the handle. If desired, apply adhesive backed velcro to the bottom of the transmitter case to further attach it to the tray.
BVM Transmitter Tray BVM #601 Price $99.95
|
