Up       

Kits Available:

 

 


 

BVM Technical Support: HSDJETSUSAtechsupport@BVMJets.com

 

 

 

My Hobby HT-45 by HSDJETS Foam Turbine Navy Colors KIT
 


 

      

Pricing and availability subject to change without notice.
If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Weight ---
Turbine Engine 8KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 47 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level □Zero basis □Beginner □Intermediate ■Advanced
KIT Assembly difficulty □☆10mins □★☆30mins ■★★60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085 (required & not included)

Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)

Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
Speed brake Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Leading edge flap Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) (required & not included)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pc
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x2 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)

 

Q: What does KIT means?

A: It means aircraft comes without any electronic equipment, such as motor, ESC, servos, remote control, battery, etc. Clients have to buy these equipment themselves.

 

Q: What does KIT+L means?

A: It's a KIT version but comes with landing gear installed.

 

Q: What does PNP means?

A: It means the aircraft got equipment already installed and tested, but clients have to buy remote control, receiver, battery and the charger themselves. For example: servos, ESC, power system, landing gear, control system (UBEC included but no power supply), light cables (according to the model of aircrafts). It's a 90% installation. Note: turbojet series products do not include turbojet engine.

 

Q: What does PNP+T means?

A: It's a PNP version with engine (general means turbine) installed and tested. It's a 95% installation.

 

Q: What does RTF means?

A: It means the aircraft comes with completely equipment installation (including battery supply, charger, remote control and receiver). It's a 100% installation.

 

 

Contact Us
All graphics, photos, and text Copyright 2023 BVM, Inc.
Use of graphics or photos without written permission from BVM is strictly prohibited.