Up
JR Radio Gear
JR Perform Packs
Cellpro PowerLab 8

 

 

Pt#   Name/Desc. Price

Mylar Thrust Tubes
Price: $ 24.50

V-FM-CP POWERLAB 8 Cellpro Power Lab 8

  When purchased from BVM, you get the balance boards, power wires with Deans connectors, and printed instructions.

$309.95
V-FM-LC10S-15ADC-MC-U  Cellpro 10XP

600W Multi-chemistry charge

 

 
$189.95
E1000A-04 EVF Fan Mounting Package
$9.00
E1000-56 E.T.A.

EVF Tailpipe Assist

$6.50
V-ET-MA220 AMP Clamp Meter

There will be an additional $9.00 shipping charge added to the order.

$99.95
E1000-43 Power Meter
$49.99
V-GP-DTXP3100 Duratrax FlashPoint Infrared Temperature Gauge

Very handy to check LiPo temps after flight.

$24.99
E1000-51 IOTA Power Supply Wire Pkg
$7.95
VC-C-Link Castle Link USB Programming Kit
$24.95
E1000-22 Power plug 2
$29.95
E1000-23 Power Plug 3
$34.95
E1000-25 Y-Harness kit 10S, 12S, 16s
for 2 Saddle CellsTM 
$18.95
E1000-24 Y-Harness kit for 3 battery packs 
$21.95
E1000-80 EVF Shroud and Mounting Hardware
$75.00
E2000-75 NACA Inlets

For summer operation.

$18.95
E1000M-FG002

Inlet Adaptor

   The BVM EVF can also be used to power airframes other than BVM that have been setup for a larger diameter fan such as the Dynamax.  Simply trim the front of the fiberglass adaptor to fit onto the rear of the larger inlet ducts.

Note: Inlet design is a very important factor affecting fan performance.

$60.00
E1000-29 Dean Plugs + Heat Shrink 2pr
$7.95
E1000-41 Charger Wiring/Connectors
$19.95
PM-SR-0002 Adhesive Velcro 3ft
(for mounting batteries)
$9.95
E1000-27 RF Filter Clamp
(2 extra required for 72 Mhz)
$5.95
E1000-55    
Cool trays

For summer operations.

$49.95

Contact Us
All graphics, photos, and text Copyright 2011 BVM, Inc. 
Use of graphics or photos without written permission from BVM is strictly prohibited.